Control Centre RWZ 5

This SHEVS Control Centre allows the configuration of one or two SHE groups and up to four ventilation groups. 24 V actuators can be controlled with a total output current of 8 to 32 A.

In addition to the DIP switches for setting the desired functions, the control centre has an internal service display that shows operating states as well as alarm and fault messages. Furthermore, coloured LEDs indicate active travel commands and other operating modes. The status of the SHEV system can thus be checked at the control centre in a user-friendly way.

Choose the preferred output voltage and output current in the dropdown menu. You can find compatible accumulators and options under “Accessories”.

    Description

    The SHEVS Control Centre RWZ 5e delivers a total output current of 8 to 32 A and has two signalling lines per SHE group. It allows the configuration of one or two SHE groups and of up to four ventilation groups.

    Besides the detectors, ventilation buttons with indication of position and an external wind and rain control of the type WRS are connectable. As an alternative, the option WRM is available as internal wind and rain control.


    General information about SHEVS and Control Centres

    A smoke and heat exhaust system is an integral part of a fire protection system. Since by far the most fire victims are due to asphyxiation, smoke and heat exhaust ventilation systems make a decisive contribution to saving human lives.
    The simultaneous opening of windows and flaps at the bottom and top of buildings ensures that fresh air can flow into the building at the bottom and smoke and toxic fumes can flow out of the building at the top.
    Since they form part of a safety system, our products must meet the highest standards. Therefore, the SHEVS Control Centre is certified according to DIN EN 12101-10, ISO 21927-9 and approved according to the guidelines VdS 2581 and VdS 2593. To ensure that the system functions reliably even in the event of a mains failure, accumulators provide the emergency power supply for at least 72 hours.

    Control centres form the centrepiece of a SHEV system. They offer numerous connection options for detectors, buttons, sensors and fire alarm control panels. All signalling lines are monitored for wire breakage and short circuits. The incoming signals are processed by the control centre and, depending on the configuration and programming, converted into travel commands, warning messages and fault messages.

    In addition to the life-saving function in the event of a fire, our control centres, controls and actuators are also suited for the natural ventilation in buildings. For the daily opening and closing of windows, roof flaps and domelights, our actuators are designed to be particularly low-noise, maintenance-friendly and durable.

    Additional information

    Ausgangsstrom
    Ausführung

    Technical Data

    TypeRWZ 5-8eRWZ 5-16eRWZ 5-24eRWZ 5-32e
    Part number8100 5508 00008100 5516 00008100 5524 00008100 5532 0000
    Line voltage supply230 V~ / 50 – 60 Hz230 V~ / 50 – 60 Hz230 V~ / 50 – 60 Hz230 V~ / 50 – 60 Hz
    Output current8 A (24 V= / 192 W)16 A (24 V= / 384 W)24 A (24 V= / 576 W)32 A (24 V= / 768 W)
    Number SHE groups2222
    Number ventilation groups4444
    Accumulators (AGM, VRLA), VdS approved2 x 7 Ah / 12 V2 x 12 Ah / 12 V2 x 17 Ah / 12 V2 x 17 Ah / 12 V
    Internal supply voltage24 V= / 72 h in case of mains failure24 V= / 72 h in case of mains failure24 V= / 72 h in case of mains failure24 V= / 72 h in case of mains failure
    Environmental class 1 / III (EN 12101-10 / VdS 2581)-5 °C … +40 °C-5 °C … +40 °C-5 °C … +40 °C-5 °C … +40 °C
    Relative humidity20 % … 80 %, non-condensing20 % … 80 %, non-condensing20 % … 80 %, non-condensing20 % … 80 %, non-condensing
    Enclosure protection ratingIP40IP40IP40IP40
    Dimensions in mm (W x H x D)500 x 500 x 210500 x 500 x 210600 x 600 x 210600 x 600 x 210

    Approvals

    • VdS approval according to guidelines VdS 2581 and VdS 2593
    • Internal power supply designed according to EN 12101-10
    • Control unit desgined according to ISO 21927-9
    • Directives 2014/35/EU and 2014/30/EU
    • Environmental class 1 (EN 12101-10 / ISO 21927-9) / III (VdS 2581)

    Downloads

    Documentation

    Accessories

    Dazu passende Komponenten:

    Contact us!

    Our team will be happy to advise you or answer any questions you may have about our products.

    Distribution

    Service