Spindle actuator S

Our S type spindle actuators work with an input voltage of 24 V=. The enclosure is made of anodized aluminium, the push rod is made of anodized aluminium or steel.

The actuator is disconnected at either end position by integrated limit switches. An electronic emergency stop switch-off protects the actuator from overload.

With the following drop-down menus you can enter the parameters relevant to you. The appropriate actuator solutions will then be listed.


    This electric 24 V= spindle actuator has a robust design and is delivered in a simple and functional enclosure. Continuous adjustability in mouting is ensured by the sliding blocks and bearing pins LB12-SL13-M5x16, which are included in the delivery.

    Special versions of this type are available on request.

    Technical Data

    Type S 08B S08C-VdS, S10C-VdS
    Nominal voltage 24 V= 24 V=
    Nominal current 0,8 A 0,8 A or 1,0 A
    Push/pull force 650 N 650 N
    Ambient temperature -20 to +60 °C, according to VdS 2580 for 2 h up to +110 °C -20 to +60 °C, according to VdS 2580 for 2 h up to +110 °C
    Dimensions See data sheet See data sheet
    Protection rating according to DIN EN 60529 IP42 IP42
    Connection cable Silicone, 2,5 m Silicone, 2,5 m


    Technische Hinweise


    Corresponding components:

    Contact us!

    Our team will be happy to advise you or answer any questions you may have about our products.