Our G type spindle actuators work with an input voltage of 24 V=. The enclosure is made of anodized aluminium, the push rod is made of anodized aluminium or steel.
The actuator is disconnected at either end position by integrated limit switches. An electronic emergency stop switch-off protects the actuator from overload. If needed, the actuators can be equipped with a rotary resolver for connection to a Synchronising Control.
With the following drop-down menus you can enter the parameters relevant to you. The appropriate actuator solutions will then be listed.
This electric 24 V= spindle actuator has a robust design and is delivered in a simple and functional enclosure. Continuous adjustability in mouting is ensured by the sliding blocks and bearing pins LB12-SL13-M5x16, which are included in the delivery. The variants G40J-VdS, G40P-VdS, GS40J-VdS and GS40P-VdS are recognized by VdS.
Special versions of this type are available on request.
| Type | G 08x, G10x, G13x | G 16x, G 20x, G 26x | G 40P-VdS; G 40J-VdS; GS 40P-VdS; GS 40J-VdS | G 40x, G 60x, G 80x |
| Nominal voltage | 24 V= | 24 V= | 24 V= | 24 V= |
| Nominal current | 0,8 A, 1,0 A or 1,3 A | 1,6 A, 2,0 A or 2,6 A | 4,0 A | 4,0 A, 6,0 A or 8,0 A |
| Ambient temperature | -25 to +60 °C, according to EN12101-2 Annex G for 30 min. up to +300 °C | -25 to +60 °C, according to EN12101-2 Annex G for 30 min. up to +300 °C | -5 to + 75°C; according to VdS 2580 for 2h up to +110°C | -25 to +60 °C, according to EN12101-2 Annex G for 30 min. up to +300 °C |
| Disconnection | Internal disconnection at either end position | Internal disconnection at either end position | Internal disconnection at either end position | Internal disconnection at either end position |
| Dimensions | See data sheet | See data sheet | See data sheet | See data sheet |
| Protection rating according to DIN EN 60529 | IP40 | IP40 | IP54 | IP40 |
| Connection cable | Silicone, 2,5 m | Silicone, 2,5 m | Silicone, 2,5 m | Silicone, 2,5 m |
| Scope of delivery | Including eyebolt M8 Ø8 mm | Including eyebolt M8 Ø8 mm | Including eyebolt M8 Ø8 mm | Including eyebolt M8 Ø8 mm |
Gxxx_dat.pdfG40P_GS40P_G40J_GS40J-VdS (20190307)-EN.pdf
Our team will be happy to advise you or answer any questions you may have about our products.
