Spindle actuator SG

Our SG type spindle actuators work with an input voltage of 24 V=. The enclosure is made of anodized aluminium, the push rod is made of anodized aluminium or steel.

The actuator is disconnected at either end position by integrated limit switches. An electronic emergency stop switch-off protects the actuator from overload. If needed, the actuators can be equipped with a rotary resolver for connection to a Synchronising Control.

With the following drop-down menus you can enter the parameters relevant to you. The appropriate actuator solutions will then be listed.

    Description

    This electric 24 V= spindle actuator has a robust design and is delivered in a simple and functional enclosure. Continuous adjustability in mouting is ensured by the sliding blocks and bearing pins LB12-SL13-M5x16, which are included in the delivery.

    Special versions of this type are available on request.

    Technical Data

    Type SG08x, SG10x, SG13x SG16x, SG20x, SG26x SG40x, SG60x, SG80x
    Nominal voltage 24 V= 24 V= 24 V=
    Nominal current 0,8 A, 1,0 A or 1,3 A 1,6 A, 2,0 A or 2,6 A 4,0 A, 6,0 A or 8,0 A
    Ambient temperature -25 to +60 °C, according to EN12101-2 Annex G for 30 min. up to +300 °C -25 to +60 °C, according to EN12101-2 Annex G for 30 min. up to +300 °C -25 to +60 °C, according to EN12101-2 Annex G for 30 min. up to +300 °C
    Disconnection Internal disconnection at either end position Internal disconnection at either end position Internal disconnection at either end position
    Dimensions See data sheet  See data sheet  See data sheet
    Protection rating according to DIN EN 60529 IP54 IP54 IP54
    Connection cable Silicone, 2,5 m Silicone, 2,5 m Silicone, 2,5 m
    Scope of delivery Including eyebolt M10 Ø8 mm Including eyebolt M10 Ø8 mm Including eyebolt M10 Ø8 mm

    Downloads

    Technichal instructions
    Data sheets
    Versions of clevis

    Accessories

    Corresponding components:

    Contact us!

    Our team will be happy to advise you or answer any questions you may have about our products.

    Distribution

    Service